A flooring installation in Vancouver runs in five steps: choose the floor, measure the rooms, prepare the subfloor, install, and walk through the finished job together. The installing is often the shortest part. Most of the difference between a floor that looks right for twenty years and one that squeaks by spring is decided in the measure and the prep.

Here is what each step looks like when we do it, and what to ask whoever installs your floor.
Step 1: Where do you start?
Start with the floor, not the quote. Hardwood, engineered hardwood, luxury vinyl, laminate, carpet and tile all install differently, and each one has its own rules for subfloors, moisture and expansion gaps.
Bring two things to our showroom at 1420 Marine Drive in North Vancouver: rough room sizes and a few phone photos of the rooms, including the doorways and any stairs. That is enough to narrow the choice to two or three products you can take home as samples. If it is easier, we can bring the samples to you with an in-home consultation.
Compare the floor types side by side on our Vancouver flooring page.
Step 2: Why does the measure matter so much?
The measure sets the order quantity, the layout and the transitions. A good measure records:
- every room, closet and stair, with the direction the planks will run
- where the new floor meets tile, carpet or a door threshold
- the height the new floor adds, so doors still swing and the dishwasher still comes out
- what is under the current floor, which decides the prep
A short order means a second batch that may not match in colour. A measure done properly avoids it.
Step 3: What prep happens before the floor goes down?
This is the step that gets rushed elsewhere and the one we care about most.
- Old floor out. Carpet, underlay, tack strip, and sometimes glued-down vinyl or tile.
- Subfloor flat. Most click floors need a flat surface within the maker's tolerance. Older Vancouver homes often need levelling first; here is how we level subfloors in older Vancouver homes.
- Moisture tested. Concrete slabs in condos and basements get tested before any wood product goes on them. Our concrete moisture testing guide explains why.
- Acclimation. Wood products sit in the home before install for as long as the manufacturer says. Follow that number, because the product warranty is written around it.
Step 4: What changes in a condo?
In a strata building, the floor needs approval before work starts. Most bylaws set an acoustic rating for the underlay, working hours, and an elevator booking for delivery and disposal. Get the approval in writing first.
Two guides help here: the strata flooring approval checklist and IIC vs STC ratings explained.
Step 5: Who actually installs it?
Ask every company this question. Our floors are installed by our own in-house crew, WorkSafeBC-covered, and every job is overseen and warrantied by Canadian Home Style. Two warranties protect a new floor, and they are worth keeping apart:
- The product warranty comes from the manufacturer and depends on the product. Ask for the term on the exact floor you pick.
- Our 3-year workmanship warranty covers the installation itself.
What should you do on install day?
- Clear small items, plants and anything fragile from the rooms the day before.
- Keep pets and kids out of the work area; there will be saws and open doorways.
- Plan for some noise and dust during removal, and fresh air afterwards.
- Ask where the transitions will sit before the first row goes down.
The final walk-through
Walk every room with the installer before they leave. Check the transitions, the baseboards or quarter round, the door clearances and the stair nosings. Then get the care instructions for your floor. Most floors are fine with Bona cleaners, but some manufacturers, Mercier, Preverco and Magna Wildwood among them, name their own care products, and their warranties expect you to use them.

Ready to plan your floor?
Visit us at 1420 Marine Drive, North Vancouver, call 604-980-6772, or book a showroom visit. Bring your room sizes and a few photos, and we will take it from there.
